You don't have to have a technological headache setting up your Orbi router. The comprehensive setup tutorial for an Orbi router is a beauty to follow when upgrading an older one or installing one for the very first time. Let's begin, shall we?

Detailed Configuring an Orbi Router

Open the package and hardware connection.

Unpack your satellite(s) and Orbi router. The Orbi router should be connected to the modem with an ethernet cable, followed by power connection. The LED glows solid white, which means that it is ready to pulse white. Wait until it does so.

Get the Orbi app.

Download the Orbi app from the store. Upon completion of download, proceed to open the app to follow the on-screen instructions for setup. You will be guided on setting up WiFi credentials and admin login.

Go to Orbilogin.Com.

Alternatively, you can proceed to complete the setup by browsing to 192.168.1.1, or Orbilogin.com. Whenever asked to log in, enter the default username and password written at the back of your router.

Satellite Positioning Strategically

Installation of the Orbi satellite or satellites is done halfway between the router and the dead zones once the router is powered on. If connected satisfactorily, the LED flashes blue, and if it disconnects, it glows amber.

Update the Firmware of Orbi

The firmware updates should be installed for Orbi after setting it up so that it delivers top performance and security. To check for updates, go to Advanced > Administration > Firmware Update in the Orbi app or log in into orbilogin.com and select Settings > Firmware Update.

Firmware updating will install new features, fix security vulnerabilities, and remedy faults on your device.

Tips

• Place your Orbi router in the center.
• Avoid installing satellites behind thick walls or big appliances.
• Finally, always keep your Orbi firmware updated.
• If you follow our tutorial, the Orbi router setup should be a breeze.

For more details visit our website.