Doing a router reset could help in case you face trouble with the network, bad internet, or an inability to access the router dashboard. Setting the Orbi device back into factory condition allows a clean slate. This article will show you how an Orbi router reset is performed step by step.

How often should you reset your Orbi router?

• If you cannot access orbilogin.net because you have forgotten your admin password.
• When the internet becomes slow or keeps disconnecting
• If your Orbi router configuration is not working properly
• After updates to your system or a change in network providers

How to Reset Orbi Router?

Locate the Reset button

• There is a small reset button on the back of your Orbi Satellite or Router.
• More often than not, it will be a pinhole.

Press and Hold

• Press and hold it for 10 to 15 seconds until you see the power LED flicker amber by using the sharp ejecting pin of a paper clip or pin.

Wait For Reboot

• Once the triple rebooted, it's back to the factory restore, wherein all the custom settings, such as WiFi name(SSID) and password, will be wiped off.

Orbi Router Setup

• Once a reset has been completed, performing the Orbi setup will be the next step. Connect your device from the Orbi Network, open any browser, and browse to orbilogin.net. Then, you will be directed by the on-screen instructions to set up your network, WiFi credentials, and administrator settings.

Stress-Free Reset Tips

• The first tip is to backup all important settings if possible.
• The Orbi device should be turned on before attempting a reset.
• After completing an installation, if the problem is not resolved by a reset, try upgrading the router firmware through orbilogin.com.

By following the reset mentioned above, you will quickly reset your Orbi router and have it running at its best. A factory reset gives a fresh start to your home WiFi network, and one of the most reliable resolutions for recurring connectivity issues.

For further information visit our web page.