A Zmodo camera not recording any event or footage can really give you a hard time, especially when you've been counting on it for that home or business security. Fortunately, you can try a series of simple troubleshooting steps to get the issue resolved and camera working again.

1. Storage Settings

The most common reason for a Zmodo Camera not recording is because of storage issues. Open your Zmodo app, go into the device settings, verify if cloud recording is turned on, and also check if your SD card is sufficiently free. In case it is not, either put in a new card or format the existing one.

2. Enable Motion Detection

The camera works in such a way that it only records when motion is detected. Go to the app and check if motion detection is turned on. You may also want to alter the sensitivity settings if you think it is neglecting to register some activity due to low sensitivity.

3. Correctly Setup Zmodo Camera

Improper setup can keep the camera from working properly. So let's hard check the setup process of the Zmodo camera.

·         Ensure the camera is connected to Wi-Fi.

·         Make sure the camera is added and online within your Zmodo app.

·         Test live viewing to make sure it is connected.

4. Perform Firmware Update for Zmodo Camera

Older firmware can disrupt recording functionalities. Follow these steps to do just that:

·         Open Zmodo App.

·         Select your device.

·         Go to settings and search for Zmodo firmware update.

·         If an update is available, update and then restart the camera.

5. Check Power Supply and Network

Make sure that the camera has a continuous power supply and that there is a stable internet connection. Unplug and plug in the camera back again or restart the router if you must.

6. Factory Reset the Camera

If that does not work, try resetting the camera to factory defaults. Hold the reset button for 10 to 15 seconds until the LED starts blinking. Reconfigure from the setup Zmodo camera steps.

Final Thoughts

Usually, a Zmodo Camera not recording issue can be solved by simple troubleshooting. Keep your device updated, check the settings, and make sure everything is set properly for your security needs. If still uncooperative, seek help from Zmodo support.